Instrument - Raw data / auto point logging

CS survey starting is not a configurable option CS controller cannot be the destination Logging distance must be a positive number

Rover

Base

Raw data logging
Log raw data for post processing
Log data to	GS sensor CS controller
Start logging	When turned on Start survey
Log data when	Static Kinematic
Logging rate	0.2 sec (5 Hz) 0.5 sec (2 Hz) 1 sec 2 sec 3 sec 4 sec 5 sec 6 sec 10 sec 15 sec 20 sec 30 sec 60 sec (1 min)
Data type to log	MDB RINEX 2 RINEX 3
Observer
Agency
Log second session
Second session logging rate	0.2 sec (5 Hz) 0.5 sec (2 Hz) 1 sec 2 sec 3 sec 4 sec 5 sec 6 sec 10 sec 15 sec 20 sec 30 sec 60 sec (1 min)
Auto logging of points
Log auto points
Auto point method	By time By distance
Log every	0.2 sec (5 Hz) 0.5 sec (2 Hz) 1 sec 2 sec 3 sec 4 sec 5 sec 6 sec 10 sec 15 sec 20 sec 30 sec 60 sec (1 min)
Log every	m

Auto points cannot be configured unless there is no raw data logging or raw data logging is set to log onboard the GS in kinematic mode on start up.