Instrument > Operation mode and antenna selection

5.1 Operation mode and antenna selection

Operating mode

To define if the instrument is used as base or as rover. This selection defines the availability of fields in the Webserver.

Antenna selection

Description of fields

Field	Option	Description
Antenna type	Selectable list	Listed are antennas in the instrument’s System RAM. Leica Geosystems antennas are predefined as default and can be selected from the list. Default antennas contain an elevation dependent correction model. New antenna correction models can be transferred from the SD card to the instrument.
Antenna measuring height	Editable field	Sets the default antenna height. This height is then used for all Static measurements.
Antenna moving height	Editable field	Sets the default antenna height for auto points and for the moving part of a track when logging raw observations. Available for Set operating mode:Rover.

Next step

IF you want to

THEN

refresh the view

click

save the antenna settings to the instrument

click

transfer an antenna file from the SD card

click

The antenna file must be a list.ant file and must be in the GPS folder of the SD card.

RTK base position

Available for Set operating mode:Base.

Description of fields

Field	Option	Description
Coordinate system settings	WGS84 Geodetic , WGS84 Cartesian or Local Grid	To view other coordinate properties.
Coordinate fields	Editable field	Negative numbers cannot be entered. The numbers must be valid on their own without conversions.

Next step

IF you want to	THEN
refresh the view	click .
save the RTK base position to the instrument	click .